T
tytyty2999
Veteran Member
do u have 107 & 108 too? dont think anyone shared it yet
M
murderscript
New member
Anyone have Nama scene Collections? https://www.pixiv.net/en/users/351010
P
Pelotalol
Member
hello, anyone have this card? https://www.pixiv.net/en/artworks/140912193
prd
Senior Member
u have 2 option:
1. use stocking, with it u can put 2 different texture since it wont mirror left and right side.
or
2. use single left side sock on clothes tab and single right side sock on accessories slot, for this setup u need mod that contain single left and right sock and a plugin that allow to put clothes on accessories slot.
as for the mod itself "[nashi] Socks v2.0" have this option
like previously mention its a common problem with headmod in general, u canWhy is there a noticeable color difference on the neck? Does anyone know how to solve this?
グラフ's Aemeath https://www.pixiv.net/artworks/141089563
use body overlay to make a color gradation in the neck area to make a seamless connection.
if the color difference are to big, either match the body color to the head which is usually easier
or make the head color match the body color although u will need to edit the head texture with editing software.
i mostly use coreldraw to add transparent skin color on top of the face texture so i can match the body color without losing its original features like makeup, lip etc on the original head texture.
Last edited:
P
Paladin Synth
Member
TallyKitty
New member
does anyone have this scene or anything similar to it? https://www.pixiv.net/en/artworks/128532501
C
cnm77
Active Member
did i miss it 😭
P
Paladin Synth
Member
This skimpy armor reminds me of certain eternal dread games, now I can't help but keep imaging poor poor symphoria gets captured by the goblins...Hi guys, I mix and matched some skimpy armor outfits and just slapped them with a simple golden texture and it looked pretty nice, sharing it here in case somebody else also likes these kinds of outfits : D
Outfit Link : https://gofile.io/d/y4grBD
Now speaking of goblins does anyone have good goblin cards?
9
97erri
KK Master
do you have eternal dread 1? I cant find it on f95 or other websites.
niugangdan
Veteran Member
I'm not gay, but you know how this blond guy is, she's so cute he's practically begging to be fucked. I really want her card.
https://nhentai.net/g/641167/
https://nhentai.net/g/641167/
C
chimen92
New member
if any of you can get one (or even both?) of those outfits, it would be nice.
皇家礼服
愚人节快乐，这次的是一套皇家礼服，希望大家喜欢 服装卡与mod在QQ群获得，群号1085912594，注意禁止二次分发以及任何金钱往来 最后感谢模型作者与sd作者，感谢群友的角色，以上www.pixiv.net
Lune Fluer
这次更新的是一套婚纱，做了4种换色，希望大家喜欢 服装卡与mod依旧在QQ群内配布，群号979929512，注意禁止任何形式或渠道的二次分发与金钱往来 感谢sd作者与模型作者
i'm also leaving something here, perhaps you'll find them useful?...
[靴子Mod配布]系带及膝靴四双
这些靴子分为皮革，鞋带，鞋尖，鞋底，鞋底侧边，鞋内里，金属（鞋带上的金属和拉链金属放在一个材质槽内）七部分。皮革，鞋带，鞋尖可直接调色，其他部位需要在ME里调节 These boots are divided into seven parts: leather, laces,Loading…
gofile.io
【防水台高跟鞋Mod配布】2026年二月集
六双主要部分均为三色可调，其余部分细调可以在ME调节 The main part of the six pair is tricolor adjustable, and the rest of the fine adjustment can be adjusted in ME
www.pixiv.net 【高跟鞋Mod配布】2026年一月集
鸽了好久，终于有闲暇时间恢复更新了！！！ 之后如果工作没有特别忙的情况下会每月更新的 三双主要部分均为三色可调，其余部分细调可以在ME调节 The main part of the triple pair is tricolor adjustable, and the
www.pixiv.net 
Eudoxus
KK Master
Reuploaded Violetv3 collection, complete and up to 2026-02-18
Pleaselog into download
Pleaselog into download
Same here, what got me into making cards was having to modify card bodies for them to be more to my tastes, and by my tastes I mean whatever Shayo's got going in their doujinsif theres anyone thats dissatisfied with makisu's body proportions like me I quickly made an edit of their marine, giving her accurate height and fixing the wonky proportions. I'll upload in case anyone wants. Big fat ass is untouched of course
Loading…
gofile.io
P
Paladin Synth
Member
https://mega.nz/file/zTREFT7T#VTALrtV9g8-kG0Q8McE7ON82TdB2gYJ4Uw0sZLAlGVc
Mega link of ED1.
Had a fun time with the series but now after I saw how well made recent gacha game's female models are I will likely only play those again if I can manage to find a mod to replace all female models in the game with azur promilia's models.
SuperWeeb64
New member
The link doesn't work anymore, any chance you can reupload it?
9
97erri
KK Master
Thank you so much saved me 10 dollars there.
Trying to play any new gacha games with these 10/10 models is so hard to not get a erection.
P
Paladin Synth
Member
https://www.pixiv.net/users/12956246I'm not gay, but you know how this blond guy is, she's so cute he's practically begging to be fucked. I really want her card.
https://nhentai.net/g/641167/
You can request this guy to make the card, he takes requests for free.
PitSmeller
Senior Member
Aye big dawg, would you mind sharing that Kafcake card?
I
ImtryingAlr
New member
Does anybody have the previous Ettole bleach video to download? He deleted the video on twitter and now I don’t have a way to view it
U
ugz2
Active Member
I didn't grab everything, but I recall you looking for these before so if it helps any
I
itun
Senior Member
MomokaDaisuki
Veteran Member
To the K site you go, fam.anyone have this jinx card mods and everything?
I just want the Poppy card... 😭
I
itun
Senior Member
that scenes from Pori https://www.pixiv.net/en/users/80910301 and it's a free scene from their mega archive https://gofile.io/d/LktnzR
T3los
Well-known Member
T3los
Well-known Member
Koikatsu card sharing request thread. コイカツ koikatu!
Koikatsu card sharing request thread. コイカツ koikatu!
T3los
Well-known Member
Koikatsu card sharing request thread. コイカツ koikatu!
Koikatsu card sharing request thread. コイカツ koikatu!
Splooderr
KK Master
Thanks, dude, I really wanted to get my hands on the Kyoko rework so bad. This might not be much, but I do have the chika versions of the latest SDs from Tachumi
Loading…
gofile.io
Peppеr
Well-known Member
Heeey~!! What exactly doesn't work? Can you describe your issue? YOurWaifuNTR-ed is online and functional on my end without any errors! (*≧◡≦) Download servers were recently updated! Domains changed too~ no longer using flashbang & trashbytes~! Currently domains are fafda & pastabillites for file downloads~ and "internal server error" isn’t happening anymore, yay~ I’m sure that was suuuper annoying for many~! Are you maybe getting a blank screen-like issue… hmm~?? ♡
The J694 dynamic bone collider is used for "items" (workspace objects) the penis isn't part of the male but a studio object! Personally I find node constraints to be wayyy better~!! Preventing hair and accessories from becoming annoyingly sticky... teehee~ Nyanify's scenes use BP for the penis to target the vagina, which is part of both character models, they're not items!! ♡ Eeee~ so handy, right?!
A
acemyth
Active Member
P
Paladin Synth
Member
Thanks for the card but I literally spent 2 hours trying to find her...somehow she has a weird name so searching {li,su, shang} none of them worked and I had to dig through my 2000 cards to find her.
Fear the sumo champion li sushang🤣🤣🤣
AbabaMerumeru
Veteran Member
Since we are talking about card making, I think it's a good idea to quote an old post of mine.I originally intended to just answer your questions but I ended up writing a whole ass guide explaining how I approach making character cards so I'll briefly address your first question here and you can read the guide below for more in-depth explanations.
By copying the slider values of the reference cards into my edited one, for example, I like the eyes of card A, and the head shape of card B, so I copy the slider values of the eyes of card A and the slider values of the head of card B and put them into one. The result won't look good if you blindly copy the sliders however, you'll inevitable have to make adjustments from observation and that's where you make use of your other references. A good example of this is my version B of the Mekami Shifty card, I copied the values of the head shape from Upiuu's Mast card because I felt like it resembled the source material very closely, and once I did that I adjusted everything else accordingly.
An important lesson you learn when studying figure drawing is to work from the biggest shapes down to the smallest, starting with the general shape of the head before moving on to the features of the face within it.
In Koikatsu this means starting with the head scale X, Y, and Z sliders, then continuing with the ears, jaw and cheeks sliders, I know that the sheer amount of sliders can be daunting but keep in mind that you can always go back and fine tune them, at this point of the process you're not supposed to be concerned with the details of the face, we're trying to get a satisfying head shape to work on as a foundation, think of it as sculpting a head with clay, you don't start with the smaller features of the face like the eyes or the nose.
Since your references are also 3d models this part shouldn't be that complicated, just make sure to angle the head of your model to match the same angles from your references and switch between them from time to time to get as close as possible. If you have a card that has a similar shape of the head you can copy the slider values from it to save yourself some time and work from there, the card doesn't have to be exactly the same as the one you are trying to match, it could even be from a completely different character as long as it has a head shape that you feel can help you get closer to the final result, otherwise you can make the head from scratch by observation, just take your time and work on the sliders one by one.
Once you're satisfied with the head shape you should start laying out the face by roughly measuring where each feature sits in the model you're trying to match, the sliders I move at this point are eye, eyebrow, nose, and mouth vertical position, as well as eye height, width, and spacing, don't concern yourself with the shape or details of the features just yet, we are laying out where each feature sits, not their specific form. Having basic anatomical knowledge helps; the eyes sit roughly at the middle point between the top of the head and the tip of the chin and are about one eye apart in width, the base of the nose sits at the middle point from the tip of the chin and the center line of the eyes, etc. I'm aware that waifus do not look like real humans most of the time but in my opinion these are still good guidelines if you find yourself having trouble placing the features of the face, and if you look at my Chun-Li card and P.Jackson's Mai these rules still apply despite how stylistically different they are from real life.
From Andrew Loomis' Drawing the Head and Hands
Lastly we concern ourselves with the features of the face as well as other character specific details, I usually start with the easier ones like mouth width and angle, eyebrow shape and spacing, and leave the eyes for last since they tend be the trickiest to get right, first with the eye rotation slider to get a basic idea of the shape, then the eye lid sliders, inner and outer eye corner height sliders and finally the upper and lower eyelash sliders, I personally don't change the eyeball scale sliders at all since I find the previous options robust enough to get the desired shape but feel free to mess around with them if you wish, additionally don't forget to play around with the iris shape and vertical position sliders as well, since a slight adjustment of the iris can make or break the appearance of the eye from my experience. Regarding character specific details, these are the unique facial features of the character you're trying to match, for example, going back to my Chun-Li card, it was important to get the eyebrows and red makeup right since these are iconic details of the character to me, this just comes down to looking at the list of face feature types in your game and find the ones that look the closest to your reference (or you could draw them in photoshop or any other raster graphics software but this guide is already long enough so I won't cover material editor and overlay stuff here lol). Ask yourself what are the details of the card you're trying to match that stand out the most, it could be the makeup, eye color, eyebrow shape, a mole, etc.
Chun-Li 3rd Strike portrait on the left, my card on the right
To summarize, start with the largest shapes first (the shape of the head, jaw, and chin),then lay out where each feature of the face sits inside the head by measuring your reference (eye, mouth, and nose vertical position and spacing),lastly work on the smallest details like eye and iris shapes and don't forget to get the character defining features like makeup or eye color. If you give yourself some structure in your work process you won't get overwhelmed by the vast sea of sliders that the character maker has.
Some closing thoughts
From personal experience it's very easy to get tunnel vision and get frustrated from not getting a specific detail right, I've read of artists dealing with this by looking at their work through a mirror, flipping their canvas upside down or looking at their work from a really far away distance, I find these pretty useful when I'm stuck but if they don't work for you just take a small break and you'll be just fine.
I also recommend saving your character multiple times as you work on it because if you feel like you messed something up and don't remember which sliders you moved you can always go back to a previous version of your character and work from there, for example I saved the Mekami Shifty card I posted like 7 times, each with a slightly different face, because I couldn't decide which one to keep working on, and even after I posted it I made another version lol, make as many copies as you can and don't be afraid to mess around with them.
I hope this guide helps you or anyone else trying to make character cards, thanks for reading till the end.
maybe
It can really be a pain hahahah
As a bonus, Imma show you somehing I don't know many people know about.
If you ever messed around with the joint bones ( j_ ) for the legs/calves, you may have noticed that when the characters bend the knees they levitate off the ground even if you increase them proportionally. (I recommend only incrementing joint bones this way as the proportions can get wacky depending on the axis of the body part, use n_/s_ or something else if you intend on independently editing x/y/z scales)
The fix I found was to scale down/up the j_hips bone depending if you decreased/increased j_thigh00 or/and j_leg01 and then scale the character up/down using the n_height bone.
For example this is what did it for me for this character:
It will not be perfect like if you had not edited those bones in the first place but it can get almost negligible.
Also, I recommend doing this in studio so you can have two copies of the same character overlaping and get the same height you intended!
Hope it helps! ദ്ദി(˵ •̀ ᴗ - ˵ ) ✧
D
Dogster456
New member
Thanks! I couldn't get it through the main link but was able to download it through the mirror links
KK DONALD'S
KK Master
R u the real EROS or just a pirate like us
lulwwhatever
New member
What a チャド this guy, thank you kind sir
KK DONALD'S
KK Master
anyone got this
S
sagat
New member
no. i have the evaan mod. i need that exact model. i think the author is name commando kitty. but tysm for helping
ZazuStare
Veteran Member
https://gofile.io/d/teQPNt --- ZNany Lohendo u have the lohen headmod?
V
Vilxord
Senior Member
Darn it, how could i be late can anyone reupload?
Pretty Please!™
Splooderr
KK Master
Bump, would like the have the latest scenes to add to my archive
Sera
Well-known Member
Symphoria probably did get captured by a few goblins, and we all know what happens next : D
(Perhaps anyone here could share some exciting scenes related to her predicament?)
Also I have a few goblin cards and maybe they'll come in handy for people who also likes these sorta things
Card Link : https://gofile.io/d/hWMbB0
megatek23
Active Member
Could you please share it?
finally
